Anti Theft Motion Sensor Alarm Lock For Home, Office And Bikes
Instructions:
- Insert Key,Turn In a Clockwise Dlrection and Remove Shackle.
- Replace Shackle Into Lock With Groove Towards Key Port.
- The Lock Will "Beep" , at This Point Remove the key and the alarm will set after 15 seconds.
- When the lock is vlbrated twice with in 5 second the alarm will sound.
- The 5 second delay allows the lock to be opened by key with out sounding.
- The alarm sound in 10 second intervals.
- The Alarm will keep sounding with constant movement or vibration.
- Once stopped the alarm will re set after 35 second.
Battery Replacement:
- To Replace the batteries remove the 2 screws in the shackle holes.
- Remove cover and replace the batteries. (6 x A76 / LR44 1.5V)
- Be sure to pay attention to polartly and that cover goes on same way it come off.
- Batteries should last 2 years under normal operaing situations.(12 Batteries Included)
Note:
- To Use As An Ordinery padlock easily insert the shackle with the groove away from the key port.
- If using on moving vehicles or equipment use as an ordinery padlock until stationry then alarm may be set.
Package Included:
- 1 x Alarm Lock
- 3 x Keys
- 6 x A76 Batteries Included (6 x A76 Batteries In this equipment )